Product Videos
FloormapVS2i
The FloormapVS2i floor scanner is a computerised MFL system designed to detect, size
and map underfloor corrosion on above ground storage tanks. The
FloormapVS2i is the best selling magnetic flux leakage (MFL) floor scanner and comes with up-graded magnets to improve
corrosion detectability and sizing on thicker materials, faster data capture with a custom designed micro controller and all new software. The VS2i contains significant improvements in terms of defect positioning, electronic data processing and software manipulation.
Handscan
The Handscan MFL corrosion detection mini scanner is designed to compliment the, MFL 2000 and FloormapVS2i floorscanners. Even in such a small configuration the latest generation of permanent magnets enable localised magnetic saturation of the floor area under test.
Signals from corrosion, above the operator controllable threshold, are displayed as both a visual and audible alarm. It’s low profile and extendable handle allow scanning in otherwise inaccessible areas of storage tanks such as the shell to annular area and under pipe work or heater coils.
Click for video
RMS2 - Rapdid Motion Scanner
The RMS2 is a high-speed remote access ultrasonic corrosion mapping
system which has improved reliability and functionality. The RMS2 is
designed for rapid, large scale inspection of ferrous structures such as
storage tanks, pipe-work, pressure vessels, risers and other critical
equipment.
ThetaScan
The ThetaScan is a cost effective, portable ultrasonic C-scan imaging system which has been developed to carry out C-scan corrosion mapping on ferrous plate and pipe.
The system is designed to be operated both on flat plates and curved surfaces with a diameter of 300mm or more.
The ThetaScan is simple to set up and use a while providing detailed and accurate
ultrasonic thickness information. Inspection results can be viewed in real time in the field or recalled for post inspection analysis at a later date.
R-Scan Lite
The R-scan Lite can be used on a wide variety of components ranging from 50mm diameter pipe up to a flat surface.
The R-scan Lite is simple to set up and is highly portable while providing detailed and accurate
ultrasonic thickness information. Inspection results can be viewed in real time in the field or recalled for post inspection analysis at a later date.
Scorpion B-Scan
The Scorpion B-scan is a rugged remote access ultrasonic crawler designed to allow cost
effective A and B-scan imaging on above ground ferro-magnetic structures
such as oil storage tanks without the need for costly scaffolding or rope access.
The Scorpion remote access crawler uses a unique “Dry Coupled”
ultrasonic wheel probe eliminating the need for traditional couplant. This allows the crawler to travel vertically, horizontally or even inverted whilst still fully functional.
Scorpion DCP
The Scorpion DCP remote access crawler uses a unique “Dry Coupled” wheel probe eliminating the need for traditional couplant.
This allows the crawler to travel vertically, horizontally or even inverted whilst still fully functional.
Compatible with most ultrasonic system, a 50 metre umbilical cable allows access to the furthest point of most structures without the
need for scaffolding.