The Handscan MFL corrosion detection mini scanner is designed to compliment the Floormap3Di, MFLi3000, Floormap3D, FloormapVS2i and MFL2000 floorscanners.
Even in such a small configuration the latest generation of permanent magnets enable localized magnetic saturation of the floor area under test.
Signals from corrosion, above the operator controllable threshold, are displayed as both a visual and audible alarm.
It’s low profile and extendable handle allow scanning in otherwise inaccessible areas of storage tanks such as the shell to annular area and under pipe work or heater coils.
Inspection data from the Handscan can be manually added into the SIMS reporting software when used in conjunction with the Floormap floor scanners to produce a complete ‘fingerprint’ of the tank floor condition.
- High POD of corrosion issues
- Easy to use by semi skilled operator
- Alternative heads available for internal scanning of small vessels and pipes
- Ideal solution for small diameter tanks below 15 m with petal design
- Low Profile with Extendable Handle
- Suitable for Shell to Annular Areas and Under Pipe Work
- Latest Generation Permanent Magnet Technology
- Separate Battery Operated Lightweight MFL Control Module
- Cost Effective Inspection Tool
How it works
The operator first connects the sensor cable between the scanning head and electronics module. Switch on the MFL control module, set the required floor thickness and adjust the alarm sensitivity using a reference pipe with known artificial defects. Then simply push the scanning head and monitor the MFL control module for the audible and visual alarm.
Any areas identified by the handscan system can then be marked on the pipe for further analysis by a secondary inspection technique, normally ultrasonics.
Principle of operation:
Magnetic Flux Leakage
18 off Hall Effect sensors
150 mm (6”)
Method of propulsion:
Hand Push / Pull
Extendable handle supplied
Clearance under pipework required 120 mm
Maximum 15 mm
Test through coatings:
Yes if non magnetic
Maximum coating thickness:
10% underfloor on un-coated 6 mm plate
20% underfloor on coated 6 mm plate
5 metre standard length
12v battery operation
Meets IATA requirements for transporting magnetizable material
18 Kg - combined weight of scanning head and MFL control module
Handscan - Small MFL tank bottom scanner
Handscan Enquiry Form
I confirm that I want to receive electronic communications from Eddyfi Technologies, including product announcements, videos, newsletters, and invitations to events or learning opportunities that we think would be of interest to you.
Products of interest
Other products of interest